Panasonic DMC-FX60 Operating Instructions Manual page 160

The LCD monitor turns off although the camera is turned on.
•
The LCD monitor turns off and the status indicator lights when [AUTO LCD OFF]
selected for the [ECONOMY] Mode.
[This does not happen when using the AC adaptor (optional).]
If the remaining battery power is low, it may take longer for the flash to be charged, and the
time during which the LCD monitor is turned off may become longer.
The LCD monitor becomes darker or brighter for a moment.
•
This phenomenon appears when you press the shutter button halfway to set the aperture value
and does not affect the recorded pictures.
•
This phenomenon also appears when the brightness changes when the camera is zoomed or
when the camera is moved. This is because of operation of the automatic aperture of the
camera, and it is not a malfunction.
The LCD monitor flickers indoors.
•
The LCD monitor may flicker for a few seconds after turning the camera on indoors under
fluorescent light. This is not a malfunction.
The LCD monitor is too bright or dark.
> Adjust the brightness of the screen.
•
[POWER LCD] is activated.
Black, red, blue and green dots appear on the LCD monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the LCD monitor.
•
In dark places, noise may appear to maintain the brightness of the LCD monitor. This does not
affect the pictures you are recording.
The flash is not activated.
•
Is the flash setting set to [Œ]?
> Change the flash setting.
•
Flash Mode is not available when Auto Bracket
has been set.
Flash is activated several times.
•
The flash is activated twice when red-eye reduction
•
Has [FLASH BURST]
Downloaded from ManualsCamera.com Manuals
LCD monitor
(P24)
(P25)
(P49)
(P68) in Scene Mode been set?
- 160 -
Others
Flash
(P58) or [BURST]
(P50) has been set.
(P26)
(P99) in [REC] Mode menu
is