Panasonic DMC-FX60 Operating Instructions Manual page 135

∫ Disconnecting the USB connection cable safely
•
Proceed with the hardware removal using "Safely Remove Hardware" on the task tray of the
PC. If the icon is not displayed, check that [ACCESS] is not displayed on the LCD monitor of
the digital camera before removing the hardware.
Note
•
This unit cannot be stood upright when the AC adaptor is connected. When placing it down and
operating, we recommend placing it on a soft cloth.
•
Turn the camera off before connecting or disconnecting the AC adaptor (optional).
•
Before inserting or removing a card, turn the camera off and disconnect the USB connection
cable. Otherwise, data may be destroyed.
•
If the camera is connected in Clipboard Mode, the built-in memory data is displayed even if a
card is inserted.
∫ Viewing the contents of the built-in memory or card using the PC (folder
composition)
A new folder is created when pictures are taken in the following situations.
•
After [NO.RESET] (P27)
•
When a card containing a folder with the same folder number has been inserted (Such as when
pictures were taken using another make of camera)
•
When there is a picture with file number 999 inside the folder
∫ Connection in the PTP Mode (Windows
Set [USB MODE] to [PictBridge(PTP)].
Data can now be read only from the card into the PC.
•
When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP
Mode.
Downloaded from ManualsCamera.com Manuals
Connecting to other equipment
1
2
3
MISC:
PRIVATE1:
(Built in memory only)
in the [SETUP] menu has been executed
- 135 -
Folder number
File number
JPG: Pictures
MOV: Motion pictures
DPOF print
Favourite
Clipboard pictures
R
XP, Windows Vista
R
and Mac OS X only)