Installing Power Button And Hard Drive Activity Led - Dell Vostro 460 Service Manual

Back to Contents Page

Installing Power Button And Hard Drive Activity LED

1. Thread the power-button cable through the routing clips.
2. Connect the power-button cable to the system board.
3. Insert the hard drive activity LED into the plastic clip.
4. Insert the power button and hard drive activity LED into the front of the computer.
5. Install the video card
6. Install the front
7. Replace the computer
8. Follow the procedures in
Related tasks
Removing Power And Hard Drive Activity LED
holder.
bezel.
cover.
After Working Inside Your Computer.