Table of Contents
Advertisement
1. Connect as Fig 6-2(RS232 serial cable is connected between COM port of PC and MON port of
TEST JIG, in general)
2. Set the Power Supply 4.0V
3. Set the 3
rd
, 4
th
of DIP SW ON state always
4. Press the Phone power key, if the Remote ON is used, 1
11.4 Procedure
1. Connect as Fig 11-2 (RS232 serial cable is connected between COM port of PC and MON port of
TEST JIG, in general.)
2. Run
Hot_Kimchi.exe to start calibration.
3. From the Calibration Lib menu, Select F3000, then, Press APPLY!
11. AUTO CALIBRATION
st
ON state
(3)
KG225
- 105 -
Advertisement
Table of Contents
