Fixed Dialing; Restrict Calls - Nokia 6010 User Manual

You need the security code to access certain phone features. When the phone
requires the security code, it displays Security code. Enter the code and select OK.
If you enter an incorrect security code five times in a row, the phone will not accept
the correct code for five minutes.
Change the security code
1 Select Menu > Settings > Security settings > Change access codes > Change
security code.
2 Enter the current security code, select OK, enter the new security code, and
select OK.
3 Enter the security code again to verify and select OK.
Important: Keep the code secret and in a safe place, separate from the phone.

• FIXED DIALING

If supported by your SIM card, this feature lets you restrict your outgoing calls to
phone numbers included in the fixed dialing list or beginning with the same digits
as an entry in the list. When fixed dialing is activated, calls still may be possible to
the official emergency number programmed into your phone.
1 Select Menu > Settings > Security settings > Fixed dialing > On or Off.
2 Enter your PIN2 code and select OK.
Add numbers to list
1 Select Menu > Settings > Security settings > Fixed dialing > Number list.
2 Select Add, enter your PIN2 code, and select OK.
3 Enter a name to go with the restricted phone number and select OK.
4 Enter the phone number you want to restrict and select OK.
5 Repeat steps 2—5 for each number you want to add to the list.

• RESTRICT CALLS

This network service, if available from your service provider, lets you restrict the
calls your phone can make and receive. Check with your service provider for details.
When calls are restricted, calls still may be possible to the official emergency
number programmed into your phone. Contact your service provider for the
restriction password.
Nokia 6010 User Guide 65
Phone security
Copyright © 2004 Nokia