Prior To Use; Installing The Software; The Cross Dj Software - Silvercrest SDJ 100 A1 User Manual And Service Information

Prior to use

Installing the software

First connect the device to the computer before installing the necessary software.
Important files can be overwritten and altered during installation of programs or
drivers. You should back up the contents of your hard drive before installing the
program so that you can still access your original files if there is a problem with the
installation.
 Insert the enclosed CD ROM into the drive and the installation menu opens automatically.
 Install the software (Cross DJ) according to the directions on the screen.
 If the device has been correctly connected to the computer, the window for entering the product
key opens:
 Now enter the product key shown on the CD case.
 Confirm the entry by clicking "Submit".
 Click on the 'Start' button to open the Start Menu.
 Click on the option 'Run...'
 Insert the drive letter of your CD-ROM drive, followed by a colon and the program name
'Autorun' (e.g. D:autorun).
 Click on the 'OK' button to confirm the entry.

The Cross DJ software

A detailed description of the software functions such as the recording function is given on the
enclosed CD-ROM. Please note that the "Preview" function is not supported by the SilverCrest SDJ
100 A1 USB Mixer.
If the setup wizard does not automatically start when the CD-ROM is inserted,
then the auto run function of your CD drive is deactivated. Then proceed as
follows:
SilverCrest SDJ 100 A1
English - 9