Your Blender - Osterizer 6650 Instruction Manual

A
CAUTION: Follow these important steps to assemble, tighten, and mount blender container quickly
and correctly. INJURY MAY RESULT IF MOVING BLADES ARE EXPOSED.
1.
1. Turn container up-side down so the small opening is at the top.
2. Place sealing ring on container opening.
3. Turn the agitator blades upside down and place in mouth of container.
4. Thread container bottom to container.
On
A B
On
C D
Do not attempt to place the container on, or remove from the motor base while the motor is running.
A H C
LWAYS OLD ONTAINER WITH
Y
SSEMBLING OUR
2. 3.
T C
IGHTENING THE
A. To tighten container bottom, put assembled
container securely into motor base ring with
handle and lug in front of the right stop.
B. Using container handle, turn container
to the left as far as possible. This insures
that the container bottom is tightened
properly. Remove container from motor
base and mount.
On
C. To operate blender, place assembled
container in motor base ring with container
lug against flat side of the motor base stop.
If container lug does not rest against flat side
of right stop, remove container assembly
and place against flat side of left stop.
Seat container firmly and operate.
D. To remove container, lift straight up. (If it is
not easily removed, rock gently and lift up,
On
do not twist.) If container bottom cannot be
loosened by hand, place assembled
container into motor base ring with handle
in front of left side stop. Using handle, turn
container to right until container bottom
loosens.
O
NE
5
B
LENDER
4.
ONTAINER
H W P
AND HILE ROCESSING
!