Osterizer 6650 Instruction Manual page 4

O ® B P C
STERIZER LENDER ARTS AND ARE
COVER
The cover for your Osterizer ® blender consists of two parts, the plastic feeder cap and the
vinyl cover. The cover is self-sealing, and is made of vinyl which is resistant to absorption
of odors and stains. The feeder cap is removable for use as a measuring cup and provides
an opening for the addition of other ingredients.
CONTAINER
The container (Diagram 1 Page 5) for the blender is graduated for easy measurement and
is molded of heat and cold resistant material. The convenient handle and pouring lip
permit easy removal of liquid mixtures while thicker mixtures are more easily removed
through the bottom opening.
PROCESSING ASSEMBLY
The processing assembly consists of three parts: (Diagram 2 Page 5) a sealing ring used
as a cushion between the container and the agitator; (Diagram 3 Page 5) agitator of
highgrade stainless steel; (Diagram 4 Page 5) a threaded container bottom.
MOTOR AND MOTOR BASE
The powerful multi-speed motor is the heart of the appliance and is designed just for this
unit. It is completely enclosed within the housing. The motor uses a "free-floating" feature
to reduce noise and wear. This allows the square post which protrudes from the motor base
to move slightly from side to side. The powerful food processing motor can be overloaded.
To avoid this possibility, closely follow the instructions in this book.
C C Y O ® B
ARE AND LEANING OF OUR STERIZER LENDER
Blender container parts are corrosion resistant, sanitary and easily cleaned. Before first use
and after every use, separate container parts and clean thoroughly in warm, soapy water, then
rinse and dry well. DO NOT WASH ANY PARTS IN AN AUTOMATIC DISHWASHER.
Periodically check all parts before re-assembly. If the processing blades are stuck or difficult
to turn, DO NOT USE BLENDER. Check by carefully turning the blades in a
counterclockwise direction (opposite edges are sharp). Blades should turn freely. If the glass
container is chipped or cracked DO NOT USE BLENDER. Further use could result in the
container breaking during use. Use only Osterizer ® recommended replacement parts
available at an authorized service facility or the factory. USE OF DAMAGED OR
NON-RECOMMENDED PARTS COULD RESULT IN SEVERE PERSONAL INJURY
AND/OR DAMAGE TO THE BLENDER. See Page 5 for proper container assembly and
user instructions. NEVER IMMERSE THE MOTOR BASE IN WATER. The housing can
be cleaned with a damp cloth (unplug first). The motor is permanently lubricated and does
not require any additional lubrication. ANY SERVICING SHOULD BE PERFORMED BY
AN AUTHORIZED SERVICE FACILITY.
4