Bottom View - Dell UltraSharp U2417HA User Manual

Bottom View

Label Description
1
AC power connector
2
HDMI/MHL connector
3 DP connector (in)
4 mDP connector (in)
5 DP connector (out)
6 Audio line-out port
7 USB upstream port
8 USB downstream ports (2) Connect your USB device. You can only use this
9 Arm lock
Use
To connect the monitor power cable.
Connect your computer with HDMI cable or MHL
devices with MHL cable (optional).
Connect your computer with DP cable.
Connect your computer with mDP to DP cable.
DP output for MST (multi-stream transport) capable
monitor. DP 1.1 monitor can only be connected as
the last monitor in the MST chain. To enable MST,
refer to instruction on section
Monitor for DP MST
NOTE: Remove the rubber plug when use DP out
connector.
Connect speakers to playback audio coming
through HDMI or DP audio channels.
Only supports 2-channel audio.
NOTE: The audio line-out port does not support
headphones.
WARNING: Excessive sound pressure from
earphones or headphones can cause hearing
damage or loss.
Connect the USB cable that comes with your
monitor to the computer. Once this cable is
connected, you can use the USB downstream
connectors on the monitor.
connector after you have connected the USB cable
to the computer and USB upstream connector on
the monitor.
Lock the arm to the monitor using a M3 x 6 mm
screw (screw not included).
"Connecting the
Function".
About Your Monitor | 9