Access Points - Nokia 3650 User Manual

3
changes and press
• Use existing settings
the new access point settings. A list of existing access points is
opened. Select one and press OK. Access point settings are opened
with some fields already filled.
Edit an access point
When you open Access points, the list of already available access points
opens. Scroll to the access point you want to edit, and press
Delete an access point
In the list of access points, scroll to the access point you want to remove
and select

Access points

Options when editing access point settings are: Change,
settings, Help, and Exit.
Here you can see a short explanation for every setting that may be needed
for different data connections and access points.
Note: Start to fill in the settings from the top because depending on
Note: Follow the instructions given to you by your service provider very
• Connection name
• Data bearer
Depending on what data connection you select, only certain setting
fields are available. Fill in all fields marked with
Other fields can be left empty, unless you have been instructed
otherwise by your service provider.
Back
to use existing setting information as the basis for
Options Delete.
what data connection you select
need to insert a Gateway IP
available.
carefully.
- Give a descriptive name for the connection.
- The options are
to save the settings.
(Data
address, only certain setting fields are
GSM data, High speed
[ 50 ]
Advanced
bearer) or whether you
GSM, and GPRS.
Must be defined.
.