Screen Description - Toyota 2012 Auris Manual

1. REAR VIEW MONITOR SYSTEM

SCREEN DESCRIPTION

Vehicles with smart entry & start system
The rear view monitor system screen will be displayed if the shift lever is shifted to
the "R" position while
the power <engine> switch is in
Vehicles without smart entry & start system
The rear view monitor system screen will be displayed if the shift lever is shifted to
the "R" position while
the engine switch is in the "ON" position.
Guide lines are displayed on the screen.
Guide lines shown differ from those shown on the actual screen.
No. Display
Vehicle width guide line
Vehicle centre guide line
Distance guide line
Distance guide line
158
ON <IGNITION ON>
Function
Displays a guide path when the vehicle is being backed
straight up.
 The displayed width is wider than the actual vehicle
width.
This line indicates the estimated vehicle centre on the
ground.
Shows distance behind the vehicle.
 Displays a point approximately 1.5 ft. (0.5 m) (red) from
the edge of the bumper.
Shows distance behind the vehicle.
 Displays a point approximately 3 ft. (1 m) (blue) from
the edge of the bumper.
AURIS_HB_WGN_HV_Navi_EE
mode.
14Å^3Å^12