Table of Contents
Advertisement
Save calling card information (step 2)
The order of the following steps may vary, depending on which dialing
sequence your card uses.
1
When prompted for the calling card's access number, enter the number
and press OK. This number is usually the 1-800 number that is listed on
the calling card.
2
When prompted to enter a calling card number and PIN number, enter
the number, and press OK. Press OK again when the Save changes?
message appears.
3
Use
or
card name using your phone's keypad.
4
Press OK.
Choose a calling card to use
If you have more than one calling card, you'll need to choose one before
making a call.
1
Press Menu 4-2-2 (Menu > Settings > Call settings > Calling card).
2
Enter your security code and press OK.
3
Scroll to the desired card and press Options.
4
Scroll to Select and press OK.
Make a calling card call
1
Enter the phone number, including any prefix (such as 0 or 1) that
may be needed.
2
Press and hold
and then Wait for tone, then press OK.
3
When you hear the tone from your calling card service, press OK.
4
After the tone, your phone displays the message Wait for tone, press
OK again. Press OK.
Note: This procedure might not apply to all the calling card
options that are programmed into your phone. Check your calling
card for more information, or contact your long distance company.
to scroll to Card name, press Select, and enter the
until your phone displays the message Card call
[ 55 ]
Use advanced calling features
Advertisement
Table of Contents
