Set up voice mail with dialing codes
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Keep in
mind that each voice mail service may vary. However, it should be similar to
the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,
press #.
4. In the standby mode, select
5. Scroll to an
(empty)
6. Enter your voice mailbox number, including the area code.
7. Enter any dialing codes as necessary using the information that you
wrote down.
If you pause for 5 seconds after connecting to voice mail, enter p twice after
the voice mailbox number; for example, 2145551212pp.
8. Enter any remaining pauses or other information that allow you to listen to
your messages, and select OK.
9. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, in the standby mode, press and hold the
assigned speed dialing key.
■ E-mail
E-mail is a network service. See "Network services," p. 5. If your wireless service
provider supports this feature, you can use the e-mail message to access the
e-mails. In the standby mode, select
■ Minibrowser messages
Minibrowser messages
"VXL," p. 69.
If your wireless service provider supports this feature, you may be able to receive
text messages via VXL. Unlike SMS text messages, minibrowser messages are not
stored in the phone and must be accessed from the minibrowser's home page. In
the standby mode, select
Menu
>
Contacts
speed dialing slot, and select Assign.
Menu
is a network service. See "Network services," p. 5 and
Menu
>
Messages
>
Speed
dialing.
>
Messages
> E-mail.
>
Minibrowser
messages.
M e s s a g e s
33