Makita 9523NBH Angle Grinder page 5

Installing the wheel guard
Mount the wheel guard with the tab on the wheel guard band aligned
with
the
notch
on
the bearing box. Then rotate the wheel guard 180" clockwise (for 9523NBH) or counter-
clockwise (for 9524NB and 9525NB). Be sure to tighten the screws securely.
1523NBH
3524NB, 9525NB
Installing side grip (auxiliary handle)
Screw the side grip on the tool securely.
The side grip can be installed on either side
of the tool, whichever is convenient.
Installing or removing the depressed center wheel
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the wheel.
Mount the inner flange onto the spindle. Fit the wheel on over the inner flange and screw
the lock nut onto the spindle.
3524NB
3525NB
Lock nut
Depressed
center wheel
-Inner flange
@ - .
Lock
nut
9523NBH
Depress e
d
center wheel
@-i n ner flange
5