Table of Contents
Advertisement
Navi Bars
• You can adjust the dish using channel preview if PID information
has been entered.
• Press OK to start the channel search.
• When you get the message on the screen that "you have found
X new TV-channels and X new radio channels", press OK to save
the new channels.
The new channels will be saved and added to the TV and radio lists.
When your antenna is controlled by a motor
• Select "Channel" in the Navi Bars.
• Select "Manual" or "Advanced" search.
• Select the new satellite name.
• Enter the settings for the transponder frequency, polarization,
etc., for the new satellite.
• Adjust the antenna towards the new satellite using "Adjust
motor". NOTE: With a user-defined satellite, you do not see a TV
picture in the background of the screen. You can get a preview
of the TV picture if PID information has been entered. Look at the
signal strength (AGC) bar to check the signal. When the signal
strength is at its best:
• Press OK to start the channel search.
• When you see a message on the screen that "you have found X
new TV channels and X new radio channels", press OK to save
the new channels.
The new channels will be saved and added to the TV and radio lists.
Edit Satellites
You can change the name, position and orientation of a user-
defined satellite. Predefined satellites can only be renamed.
Delete Satellite
You can only delete user-defined satellites.
When you delete a satellite, you also delete the channels that
belong to it.
GB 23
Advertisement
Table of Contents
