Nokia 252C Owner's Manual page 57

2 You'll see
the currently selected card. Press
OK to change it.
3 Use ! to move the pointer to
None Card A
,
press OK. When the phone asks for your security
code, enter it and press OK.
If you select
CARD SELECTED
Note: If you've already stored card information, and
then later select None, the active card is deselected.
However, stored card information is left intact.If you
Card A
select
information for the card before, skip to Step 5.
4 If you've already entered informa-
tion for a Card, you then have the
option to
Erase
the card. Use ! to move
the pointer to the option you
want, and press OK.
Select
The phone briefly displays
Edit
allows you to change already-entered
information, described in Steps 5 and 6 on next page.
Erase
erases the stored information. To verify that
you want to do this, press OK at the
prompt. Press CLR if you don't want to erase the
stored information.
5 The phone prompts you to
SELECT DIALING
SEQUENCE
CALLING CARD
Card B
or
None
, the phone briefly displays
, and no card is selected.
Card B
or
Select Edit
,
chooses this card as the one to use.
. Press OK.
and
, then
, and you've never entered
, or
SELECTED
50
NO
.
ERASE?