Service And Support; Frequently Asked Questions - Philips SRP4004/86 User Manual

4
4.1
In this chapter you will find answers to the most frequently
asked questions about your universal remote control.
I cannot enter setup mode.
Battery level too low or battery lifetime came to an end.
• R eplace the batteries. For this see chapter 2.1.
My TV turns OFF in step 4 but does not turn ON again in
step 5.
TVs of some brands (e.g. Panasonic) only turn ON after a
long press on one of the digit keys. After a long key press in
setup mode the remote control will start trying to improve
the key (see chapter 2.3.2) instead of turning ON the TV.
• I n this case, turn ON the TV manually or use the original
How do I set the remote control for combo devices
(TV / VCR, TV / DVD, DVD / VCR, etc)?
Some combo devices require you to set up two different
source selection keys to control both parts of the combo
device. For example, if you have a TV / DVD combo, you
might need to set up the remote control for both TV and
DVD to operate your TV / DVD combo.
SRP4004_86_Manual.indd 11

Service and support

Frequently asked questions

Setup
remote control for this. Continue with step 6. After
successfully completing setup, the remote control will
turn ON the TV with a long key press on one of the digit
keys, just as your original remote control.
EN
11
28-05-09 18:17