Table of Contents
Advertisement
placed on the bowl.
4.
Insert Chopping Blade / Beating disc/ Knead-
ing hook into the drive shaft and release.
5.
Add ingredients.
6.
Attach lid with pusher and rotate it anticlock-
wise until it is fully locked into the bowl.
SLICING, SHREDDING AND
GRATING INSERTS
Be sure the unit is OFF and the cord is
unplugged before use.
Use Food Pusher when processing food - never
use hand to push food directly.
Let unit do the work, heavy pressure will not speed
operation. Do not use the processor continuously
for more than 3 minutes at a time, allow a rest pe-
riod of 5 minutes between working cycles (when
mixing, the cycles can be longer, e.g. 5 minutes
on end).
The blade and grater attachments are not suit-
able for processing walnuts, nuts, horseradish and
similar foods. Use the grater attachment to process
hard cheeses.
How to process small or long pieces
of food (B)
1.
Place the Bowl onto the Base.
2.
Ensure the Drive shaft is placed in position.
3.
Extract the required insert from the drawer.
4.
Insert the required insert into the carrier disc.
5.
Attach the carrier disc to the drive shaft.
6.
Lock the cover with the big food pusher.
7.
Put small, long food with the small food push-
er. Use the Food Guide to help you prepare
food for slice/shred processing.
8.
Rotate the knob clockwise until it is on
"LOW"/"HIGH" for continuous processing.
Put down the big food pusher with about 400-
500g force.
9.
After processing food, rotate the knob anti-
clockwise until it is on "OFF ", allow the disc to
stop rotating, twist the Cover towards unlock
to remove the cover.
How to process large pieces of
food (C)
1.
Place the Bowl onto the Base.
2.
Ensure the Drive shaft is placed in position.
3.
Insert the required insert into the carrier disc.
4.
Attach the carrier disc to the drive shaft.
5.
Lock the cover with the big food pusher.
6.
Put the large food into the big food chute on
the cover, then push the big and small food
pusher together. Use the Food Guide to help
you prepare food for slice/shred processing.
7.
Rotate the knob clockwise until it is on
"MIN"/"MAX" for continuous processing, put
down the big food pusher with about 400-
500g force.
8.
After processing food, rotate the knob anti-
clockwise until it is on "OFF ", allow the disc to
stop rotating, twist the Cover towards unlock
to remove the cover.
Removing big food pusher will stop the
motor.
USE THE JUICE EXTRACTOR
ATTACHMENT (D)
Please read "Important information and
safeguards" paragraph before using.
Use this function to squeeze the juice out of pip
fruits (e.g. apples, pears), berries, pitted stone
fruits, vegetables (e.g. carrots, tomatoes).
1.
Place the Bowl onto the Base.
2.
Ensure the Drive shaft is placed in position.
3.
To assemble the juice extractor attachment,
screw the grater with the filter basket in the
lock position in an anticlockwise direction.
4.
Attach cover for juice centrifuge an rotate in
an anticlockwise direction.
5.
Turn the rotary switch to a low speed setting.
6.
Add fruit or vegetables through the feeding
tube and only gently push forward with the
pusher. Cut beforehand if necessary.
7.
After processing, set the rotary switch briefly
to high speed and leave the appliance run-
ning until all the fruit pulp has been squeezed
out.
Maximum processing quantity: 250g
fruit or vegetables.
en
co.uk
hotpoint.
7 7
Advertisement
Table of Contents
