Black & Decker KA280 Manual page 12

ENGLISH
Item Description
Replacement louvre sanding sheet
attachment.
60 grit louvre sanding sheet.
120 grit louvre sanding sheet.
120 grit profile sanding sheet.
Hints for optimum use
For user comfort, the tool can be operated with one or

two hands (fig. R). Do not place your hands over the
ventilation slots.
Do not exert too much pressure on the tool.

Regularly check the condition of the sanding sheet.

Replace when necessary.
Always sand with the grain of the wood.

When sanding new layers of paint before applying

another layer, use extra fine grit.
On very uneven surfaces, or when removing layers of

paint, start with a coarse grit. On other surfaces, start
with a medium grit. In both cases, gradually change to
a fine grit for a smooth finish.
Consult your retailer for more information on available

accessories.
Accessories
The performance of your tool depends on the accessory
used. Black & Decker and Piranha accessories are
engineered to high quality standards and designed to
enhance the performance of your tool. By using these
accessories you will get the very best from your tool.
Maintenance
Your Black & Decker tool has been designed to operate over
a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.

Or switch off and remove the battery from the appliance/

tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and

then switch off.
12
Purpose
For attaching louvre sanding sheets.
For a course finish for louvre sanding.
For a medium finish for louvre sanding.
For a medium finish for profile sanding.
Unplug the charger before cleaning it. Your charger

does not require any maintenance apart from regular
cleaning.
Regularly clean the ventilation slots in your appliance/tool/
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust from
the interior (when fitted).
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.

Connect the brown lead to the live terminal in the

new plug.
Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.