Electrolux E32AF75JPS Manual page 2

Built-In All Freezer
E32AF75JPS professional series
32" Built-In All-Freezer Specifications
Product Weight – 237 Lbs.
•
An electrical supply with grounded three-prong receptacle is
•
required. The power supply circuit must be installed in accordance
with current edition of National Electrical Code (NFPA 70) and
local codes & ordinances.
Voltage Rating – 120V / 60 Hz / 20 Amps
•
Connected Load (kW Rating) @ 115 Volts = 0.55 kW
•
Amps @ 115 Volts = 5 Amps
•
Always consult local and national electric & plumbing codes.
•
Water line for ice maker can enter opening through floor or rear wall.
•
Copper tubing recommended between cold water line and water
connection location. Water line tubing recommended is 48" minimum
length by 1/4" diameter. Installation of easily accessible shutoff valve in
water line required.
Minimum 25-1/4" depth requires recessed electrical outlet and copper
•
water line.
To allow for ease of installation, tape excess power cord to back of unit.
•
To allow for ease of moving out side-by-side units after installation,
•
84" minimum length of coiled copper tubing recommended.
When installing freezer adjacent to wall, cabinet or other appliance that
•
extends beyond front edge of unit, 20" minimum clearance recommended
to allow for optimum 140° door swing, providing complete drawer / crisper
access and removal. (Absolute 4" minimum clearance will ONLY allow for
90° door swing which will provide limited drawer /crisper access with
restricted removal.)
Freezer must be placed on level surface of hard material, same height as
•
flooring. Surface must support approximately 800 lbs. when fully loaded.
Unit equipped with 4-point leveling.
Electrolux Major Appliances, N.A.
10200 David Taylor Drive Charlotte, NC 28262
USA
• •
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4
• •
E32AF75JPS 11/11
1-877 -4electrolux (1-877 -435-3287)
electroluxicon.com
• •
1-800-265-8352 electroluxicon.ca
• •
© 2011 Electrolux Home Products, Inc.
"Built-In Look" Specifications
Minimum opening of 72" H x 33" W x 25-1/4" D required for single-unit
•
"Built-In Look" installation; 66" W required for double-unit installation.
(72" H to be measured from finished floor to underside of soffit or
overhead cabinet.)
Optional Trim Kit Specifications
For planning information, refer to model-specific Trim Kit Installation
pages on web.
Optional Trim Kits available for built-in installation with All Refrigerator
•
and/or All Freezer – requiring different cutout dimensions.
Designed as built-in replacement option for any model(s) having
•
pre-existing opening(s) with same cutout dimensions as stated for
specific Trim Kit or for new-build installation.
Remove all wall / floor molding prior to built-in installation.
•
For detailed Trim Kit installation, refer to instructions packed with kit
•
or on web.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
Optional Accessories
84" Louvered Trim Kits:
•
Single – (PN # ECP8436SS), Double – (PN # ECP8472SS).
72" Collar Trim Kits:
•
Single – (PN # ECP7236SS), Double – (PN # ECP7272SS).
79" Louvered / 75" Collar Trim Kits:
•
Single – (PN # TRIMKITSS1), Double – (PN # TRIMKITSS2).
PureAdvantage ® Air Filter Replacement Cartridge – (PN # EAFCBF).
•
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.