1
002962
Reinstall the crank cap and tighten with the lock nut
wrench.
CAUTION:
Do not tighten the crank cap excessively. It is made
•
of resin and is subject to breakage.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Bull point
•
Scaling chisel
•
Scraper assembly
•
Bit grease
•
Lock nut wrench 28
•
Hex wrench
•
Dust cover
•
Safety goggles
•
Hammer grease
•
Steel carrying case
•
1. Hammer grease
or
attachments
Only use
accessory or
are
6