Advertisement
Begin by removing all items from the trunk of the vehicle and make sure that all
1.
tail lights are in working order. If not, now is a good time to replace them. Also
remove the carpet that covers the floor of the trunk, as it will reveal several
fasteners that you will remove later.
Remove the tail light covers. Push inward on the clip, and the light will release
2.
itself. Now depress the wiring clip attached to the light bulb housing to release
the housing, and move the housing safely away from your working space.
Now, look to the floor of the trunk. You will see that the two plastic casings on
3.
either side of the trunk are secured by plastic screws on the passenger side and
fasteners on the drivers' side. Remove the fasteners using you panel removal
tool as shown. The plastic screws on the passenger side can be removed using a
flat head screwdriver. The battery is located underneath this panel on the
passenger side.
Now, remove the two plastic fasteners on the carpeted driver side panel out of
the trunk, remove the panel, and you'll see the pass through into the trunk.
(Driver's Side)
(Passenger's Side)
Advertisement
