Canon Legria HF21 Instruction Manual page 156

Cannot record movies on this memory card
- Movies cannot be recorded on a 64 MB or smaller memory card.
Cannot record movies on this memory card Initialize only using the camcorder
- The memory card in the camcorder was initialized using a computer. Initialize the memory
card with this camcorder (
Change the battery pack
- Battery pack is exhausted. Replace or charge the battery pack.
Check the memory card
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- A memory card error occurred. The camcorder cannot record or display the image.
- You inserted a MultiMedia Card (MMC) into the camcorder. Replace it with an SD/SDHC mem-
ory card compatible for use with this camcorder (
- If after the message disappears,
corder and remove and reinsert the memory card. If
recording/playback.
- Initialize the memory card (
card.)
Could not add the scene(s) to the playlist
- One or more scenes could not be added to the playlist. The playlist can contain a maximum of
999 scenes. If the playlist includes scenes recorded in MXP or FXP mode, the maximum num-
ber of scenes in the playlist may be less than 999. Delete some scenes from the playlist
( 85).
Data includes scenes in MXP/FXP mode. Cannot copy to this memory card.
- Movies recorded in MXP or FXP mode cannot be copied onto a memory card if it is rated
Speed Class 2. Replace the memory card with one rated Speed Class 4 or 6.
Do not disconnect the USB cable or the power source until you safely end the connection from
the computer. Cannot write data with this connection. To write data to the camcorder,
connect the compact power adapter then reconnect the camcorder and computer.
- The camcorder cannot be operated while it is not being powered by the compact power
adapter and is connected to a computer with the supplied USB cable. In addition, scenes can-
not be written back and music files cannot be transferred to the camcorder. To avoid corrupt-
ing the data in the camcorder's memory, use the computer's Safely Remove Hardware
function to end the connection and disconnect the USB cable before using the camcorder.
- To be able to write back scenes and to transfer music files to the camcorder, use the com-
puter's Safely Remove Hardware function to end the connection, disconnect the USB cable,
power the camcorder using the compact power adapter and only then connect it to the com-
puter again.
156
Additional Information
39).
appears in red, perform the following: Turn off the cam-
39). (Doing so will erase all the recordings on the memory
37).
turns back to green you can resume