Raidar Commands - NETGEAR Ultra 6 Hardware Manual

ReadyNAS Ultra Hardware Manual

RAIDar Commands

Use the following RAIDar commands to monitor your devices.
Setup
Clicking the Setup button launches the FrontView Management Console for the highlighted
device. FrontView is a web-based utility used to set up, configure, and manage your devices.
If this is a first-time installation, or the device has been reset to the factory default settings,
the Setup Wizard launches so that you can configure the device.
Browse
Click Browse to see the shares available on the highlighted device. This only works with
Windows operating systems.
Rescan
Click Rescan to update the ReadyNAS device list and status.
Locate
Click Locate to cause the LEDs on the ReadyNAS device to blink. This is useful if you have
multiple ReadyNAS devices and you need to correlate the RAIDar entries to physical
devices.
About
Click About to display RAIDar info.
Help
Click the Help button to shows the Help screen.
Exit
Click the Exit button to exit the RAIDar utility.
12 | Chapter 1: Getting Acquainted