Programming The Cyclocomputer - Cannondale IQ118 User Manual

PROGRAMMING THE CYCLOCOMPUTER

THE SETTING SEQUENCE
In the Setting Sequence, the variable being adjusted will flash in the display. Press the FUNCTION key to adjust and
Press the SET key to set the value and advance to the next variable.
NOTE: You must first select Bike 2 (see Operating the Cyclocomputer, Page XX) to effect settings for alternate bike.
SELECTING LANGUAGE
Your IQ Series Cyclocomputer has 5 language choices: English, German, French, Italian and Spanish. Scroll through
choices by pressing the FUNCTION key. Press SET to Select language and advance to set units of measurement.
: :
ADJUST ADJUST
PRESS FUNCTION PRESS FUNCTION PRESS FUNCTION
8 english / deutsch / español / italiano / francais
Set Language &
advance to Set Units:
PRESS SET
:
ADJUST
PROGRAMMING THE CYCLOCOMPUTER
SETTING UNITS (MILES OR KILOMETERS)
Set Units & advance
to Set Wheel Size:
:
ADJUST
PRESS FUNCTION
PROGRAMMING WHEEL SIZE
Cannondale IQ Series Cyclocomputers are preset to a 700 X 23 wheel size. To assure accurate Speed and Distance
measurements, you must enter the correct wheel circumference (in millimeters). On page 14 is a chart listing most
popular wheel sizes and their circumferences. If you can not find your wheel size on the chart, page 15 details the
method for manually measuring your wheel size.
(continued next page)
PRESS SET
9