Loudspeaker Installation; Technical Specifications - FlEXSYS F212 User Manual

ROTATING HORN (Only for FLEXSYS F212)
When used horizontally, the F212 loudspeaker allows to maintain the same coverage
angle by featuring a rotating horn.
The speakers are always supplied by the manufacturer with the horn positioned horizontal
at 60°by default.
If you wish to change the coverage angle (FIG. 5):
- unscrew the fixing screws of the grille
- remove the front protective grille by slightly pressing on one side and taking the grille
off the recessed slots
- unsscrew the eight fixing screws of the horn
- rotate the horn in the desired position (the horn should never be removed from the
driver!)
- tighten the fixing screws of the horn
- put the grille back in the recessed slots and tighten the screws of the grille.

LOUDSPEAKER INSTALLATION

WARNING
Make sure that the loudspeaker is securely installed in a stable position to avoid any
injuries or damages to persons or property.
For safety reasons do not place one loudspeaker on top of another without proper
fastening systems. Before hanging the loudspeaker check all the components for
damages, deformations, missing or damaged parts that may compromise safety during
installation.
If you use the loudspeakers outdoors avoid places that are exposed to bad weather.
The loudspeaker has the following mounting options:
- bookshelf (FIG. 1)
- on speaker stands (FIG.2)
- suspended with support rails or brackets supplied by the manufacturer (FIG.3)
WARNING
Never use the handles to hang the speaker!
WARNING
To hang the loudspeaker use only one eyebolt for each hanging point
The hanging points are of M10 threads.
Do not unscrew both bolts recessed in the housing!
13
WRONG! EXACT!
EXACT!

TECHNICAL SPECIFICATIONS

FLEXSYS F212
System Active Bi-Amp
Type of amplifier Class D
RMS power 500W + 250W
Frequency response 65-19000Hz (-3dB)
50-20000Hz (-10dB)
Crossover 1800Hz - 24dB/oct
Sound pressure (max SPL) 132dB
Component s
2x12" woofer - 2,5" voice coil
1x1"compression driver - 1,75" voice coil 1x6.5" midrange - 2" voice coil
Dispersion 60°x40°
Input sensitivity max -3dBu
Impedance input Balanced 20Kohm
Unbalanced 10Kohm
Power supply Full-range with PFC
100-240Vac 50-60Hz
Housing shape Trapezoidal
Colour Black
Dimension (WxHxD) 360x930x500mm
Weight 31,5Kg
Flying support 12 x M10
Pole mount cup D36mm
Handle 2 (one per side)
1 top side
1 back side, niche
Rotating horn Yes
Integrated tilt unit Yes
FLEXSYS F315
Active Bi-Amp
Class D
500W + 500W
60-19000Hz (-3dB)
47-20000Hz (-10dB)
750Hz - 24dB/oct
2000Hz - 18dB/oct passive
131dB
1x15" woofer - 3" voice coil
coil
1x1"compression driver - 1,5" voice
90°x40°
max -3dBu
Balanced 20Kohm
Unbalanced 10Kohm
Full-range with PFC
100-240Vac 50-60Hz
Trapezoidal
Black
440x880x500mm
31Kg
12 x M10
D36mm
2 (one per side)
1 top side
1 back side, niche
No
No
14