Remote Control Unit - Pioneer F-F3-J Operating Instructions Manual

Controls and displays
7 BAND
1
Selects FM or AM.
8 MENU
Use to enter/exit menu mode.
The unit times out if no operation is performed
for about five seconds after the menu mode is
set.
9 TUNING/PRESET dial
Press this dial to select an option or execute a
command.
Turn this dial to select menu options, radio
presets or stations.
In the tuning mode, the reception frequency
can be tuned in an increasing or decreasing
direction. Turn the dial clockwise to change the
reception toward higher frequencies. Turn the
dial counterclockwise to tune the reception
toward lower frequencies.

Remote control unit

1
1 2
2
4 5
7 8
MEMORY A.PRESET/A.TUNE
3
10
4
MENU
ST-
5
BAND
6
MPX
VOLUME
7
TUNER
Note
1 Noise may be generated when receiving AM or FM if a near-by television set is turned on. The tuner should be used as far away
from a television as possible.
2 Effective period of memory back-up is about a month under normal temperature.
8
DIMMER
DISP
9
3
A/B/C
10
6
D/E/F
9
G/H
I/J
11
TUNE+
ST+
12
ENTER
TUNE-
AMP CONTROL
13
MUTE
In the preset mode, turning this dial moves the
selected preset channel
tuning operation cannot be used when in this
mode.
When inputting station names, use this dial to
select desired characters (page 18).
10 Remote sensor
11 DISPLAY
Use to select the display mode (page 18).
12 AUTO PRESET
When pressed during FM or AM mode,
receivable stations are automatically stored in
the preset memory in order starting from
preset channel A1.

1
Switches the unit between standby and on.
2 Station call buttons (1 to 10)
Use these buttons to preset stations, and to
recall previously preset stations.
3 MEMORY
Use to preset stations. This button is also used
for manual station-name character selection
for FM and AM broadcasts, and for Program
Type search.
4 MENU
Use to enter/exit menu mode.
5 BAND
Selects FM or AM.
2
up or down. The auto
03
11
En