Trouble Recovery
1. Water separator-alert indicator
1.
Stop the engine.
2.
Remove the top cowling.
3.
Remove the plastic tie.
1. Plastic tie
4.
Disconnect the water detection switch
coupler. NOTICE: Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
78
[ECM01950]
1. Water detection switch coupler
5.
Unscrew the filter cup from the filter hous-
ing. NOTICE: Be careful not to twist the
water detection switch lead when un-
screwing the filter cup.
1. Filter cup
2. Water detection switch lead
6.
Drain the water in the filter cup by soaking
it up with a rag.
[ECM01960]