Sanyo VPC-J2EX Instruction Manual page 37

Hide thumbs Also See for VPC-J2EX:
Table of Contents

Advertisement

About the CHARGE indicator
The CHARGE indicator shows the status of the
battery pack and the charger.
Please refer to the following table if the indicator
flashes abnormally.
CHARGE indicator
Not lit
Lit red
Lit green
Red flashing
About the internal backup battery
i This camera's internal battery serves to maintain the date and time set-
tings, as well as the shooting settings. The backup battery will be fully
charged when the batteries are kept in the camera continuously for about 2
days. In the fully charged state, the backup battery will maintain the cam-
era settings for about 7 days.
When not using the camera for a long time, remove the batteries
i A small amount of power is still used even if the digital camera is turned off,
and it is therefore recommended that the batteries be removed from the
camera if it is not going to be used for a long time. Note that when the bat-
teries are removed for a long period, the time and date settings may be
cleared. Before using your camera again, be sure to confirm that the cam-
era settings are correct.
Not connected properly
i To recharge the battery pack, the power cord of
the charger must be connected to a power out-
let, and the plug at one end inserted in the
charger's power socket (see page 27).
i The battery pack is not installed, or it is not
installed correctly (see page 27).
Recharging
Recharging finished
Problem with the battery pack
i Immediately remove the battery pack from the
charger.
i Do not use an abnormal battery pack. (The
usable life of the battery pack has probably
expired.)
CHARGE indicator
English
34

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpc-j2

Table of Contents