Sanyo VPC-J2EX Instruction Manual page 15

k Cautions when plugging in the battery pack charger
i Securely plug the power cord all the way into the
power outlet when using the battery pack charger. If
the battery pack charger is used with the power cord
not fully plugged in, heat may be generated and cause
a fire.
i If the power cord is damaged, or cannot be correctly
plugged into the power outlet, do not use the battery
pack charger. Using the battery pack charger in this
condition may cause a fire or electric shock.
i Do not allow dust, etc., to build up on the power cord
or power outlet. A build-up of dust may cause a short
circuit or generate heat and cause a fire.
i When unplugging the power cord, be sure to hold the
power plug and slowly pull it out of the power outlet.
Pulling the cord portion may damage the power cord
and cause a fire or electric shock.
k Do not pull on the power cord to unplug it
i Do not leave the power cord plugged into the power
outlet while the other end is not plugged into the bat-
tery pack charger. The loose end can cause electrocu-
tion if touched with wet hands or if handled by
children.
i Use only the power cord supplied with the battery
pack charger. If a different power cord is used, it may
be rated for a different current load, and that may
cause a fire.
i The supplied power cord is for exclusive use with the
supplied battery pack charger. Do not use it with other
devices, as doing so may cause a fire or electric
shock.
i Do not use a bundled power cord, as the heat gener-
ated may cause a fire.
i When using an extension cord, make sure that the
total wattage of the connected devices does not
exceed the rated value of the extension cord. If the
power load exceeds the rated value, it may cause a
fire.
12
English