Viewing the Self Check Diagnostic List
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
Channel 5
DISPLAY
The Self Check list displays.
Results for all of the following diagnostic items are displayed at the bottom of the screen. No error has occurred if the screen displays a "0".
2: MAIN_POWER
3: DC_ALERT1
4: DC_ALERT2
5: DC_ALERT3
Clearing the Self Check Diagnostic List
1. In Service Mode, press the Channel 8
KDL-26M3000/26ML130/32M3000/32ML130
Volume +
TV POWER .
This is the SAME as accessing Service Adjustments.
0
6: BL (Back Light)
0
7: TEMP
0
7: Audio
0
Channel 0 .
KDL-26M3000/26ML130/32M3000/32ML130
0 Í 0 indicates no error was detected
1 Í 1 indicates an error was detected
0
11