F
C
EATURES AND
ONTROLS
Front View
A Eject / Close Button
B On / Busy LED
C Pin Hole Eject
Figure: Front view of BD drive
Push button to open or close the tray.
Indication of drive's operation status. When LED is on, the disc is
loaded and ready; when blinking, the drive is reading / writing /
rewriting or the disc is loading.
If the Eject button fails to work properly, insert a paper clip into
this hole to open the tray.
CAUTION: Turn off power to the drive before performing manual
ejection.
Note: Turn on the power before operating the drive.
9
ENGLISH
ENGLISH