Write Problems - LiteOn eHBU212 User Manual

Write Problems

Symptom Possible Cause
Cannot write to disc Authoring software used
does not support your BD
drive
Disc inserted upside down
Insufficient hard disk
capacity
No power
SATA cable not properly
connected
Writing errors occur Defective or damaged disc
Insufficient hard disk
capacity
Drive not SATA cable not properly
recognized connected
Authoring software used
does not support your BD
drive
Cannot write at BD/DVD/CD media not
highest speed compatible with high speed
Defective or damaged disc
Solution
• Use the authoring software provided with the
BD drive.
• If using other software, contact the software
supplier (or check the appropriate website)
to ensure that it supports your BD drive.
• Reinsert the disc label side up.
• Ensure that 1.2 to 2 times the capacity of the
write data is available on hard disk.
(Required capacity may vary according to
write method.)
• Ensure that the power cord is connected
securely (at all connections).
• Ensure that the SATA cable and connectors
are not damaged (check the pins carefully),
and both sides are connected.
• Always use high-quality media.
• Always handle discs with care and keep
them clean. Deep scratches, fingerprints, or
other contaminants on a disc's surface can
make it unreadable.
• Ensure that 1.2 to 2 times the capacity of the
write data is available on hard disk.
(Required capacity may vary according to
write method.)
• Ensure that the SATA cable and connectors
are not damaged (check the pins carefully),
and both sides are connected.
• Use the authoring software provided with
your BD drive.
• If using other software, contact the software
supplier (or check the appropriate website)
to ensure that it supports your BD drive.
• Use media rated for the highest speed your
drive can write to.
• Always use high-quality media.
• Always handle discs with care and keep
them clean. Deep scratches, fingerprints, or
other contaminants on a disc's surface can
make it unreadable.
20
ENGLISH
ENGLISH