Live View Components - D-Link ShareCenter DNS-320L User Manual

Section 4 - Configuration
COMPONENT
Live Video
Stop/Start
Manual Recording & General
Settings Tab
Digital Zoom
Camera Details
Patrol Modes
Pan-Tilt-Zoom Control
Zoom
Mute and Volume Slider
E-map
Snapshot
Auto Scan
View as 1x1
View as 2x2
Actual Size
Full Screen
Camera Name and IP Address The icons indicate the Status of Each Camera. You can double-click to Toggle Between the Status of Each Camera.
D-Link ShareCenter DNS-320L User Manual

Live View Components

DESCRIPTION
View the Live Video from cameras connected to your DNS-320L via the network.
Click to Stop or Start Live Camera View.
Click the Manual Recording button to Stop or Start Manual Recording.
Click the Gear Cog button to set up Basic Configuration.
Enable the Zoom Function on Individual Cameras.
This screen shows the Currently Selected Camera's IP Address, Name, Status, and Bit Rate.
Displays the Current Patrol Radius, sets Preset Point, and directs you to the Preset Point.
Used to control the Direction of Cameras that Support Pan-Tilt-Zoom controls.
Click the + or - button to Zoom in or Zoom out. (This option is only available when Digital Zoom is enabled.)
The Mute button can be used to Mute the Audio from the camera, and the Slider Bar used to Adjust the Volume.
Use the E-map button to Toggle Between the Live Camera View and the E-map Display.
Take a Live Snapshot of the Live Streaming Video.
Activate Auto Scan to Rotate the Channels on the Screen Display.
The button with the number one is for Viewing One Screen at a Time.
The button with the number four is for Viewing Video from Four Cameras at Once.
The button at the bottom left lets you View the Image at the Actual Size.
The button at the bottom right lets you View a Live Video Stream from Any Camera in Full Screen Mode.
Press Escape to Return to the User Interface.
226