Linear MVP Installation Instructions

MVP Quik-Code Transmitter
Installation Instructions for
Garage Door and Gate Operators
Proper installation of your radio controls will assure years of
trouble-free operation
READ THE FOLLOWING INSTRUCTIONS THOROUGHLY
BEFORE STARTING INSTALLATION
Your new radio controls are designed to remotely operate garage door and gate
openers. The transmitter permits the user to select one of 19683 possible codes
for each one of the three buttons. The radio frequency of the remote controls is
Þ xed and tuned at the factory; adjustments are not required and should not be
attempted by the end user.
The MVP Quik-Code transmitter is based on the latest technology and provides
maximum performance and maximum ß exibility. Since each button of the
Quik-Code transmitter may be programmed with a unique code, it is possible to
control a single operator or a group of operators at one location or at multiple
locations.
The Quik-Code transmitter may be mounted on a visor using the metal visor clip
(included) or attached to a key-chain with the built-in attachment.
WARNING
Keep transmitters and remote controls out of the reach of children.
Do no let children play with or use the transmitter or remote controls.
Unexpected door operations can cause personal injury or property damage.
Do not place transmitter where the buttons can be accidentally or unintentionally activated.
Radio Control Compatibility
In addition to the Linear MVP and Challenger E-Series Residential Garage Door
Operator, the MVP Quick-Code transmitter is designed to be compatible with all
Linear MVP series receivers.
Linear Radio Controls are compatible with HomeLink®.
Homelink® is a registered trade mark of Johnson
Controls, Inc.