Philips 220SW8FB1/69 Service Manual page 59

GENERAL PRODUCT SPECIFICATION(Continued)
C. Image Viewing
D. Economy
E. Off
7. Gamma Table turn off to achieve
8. Fastest response time. (N/A for this model)
9. Smart Contrast set to "On"
i. Purpose: Design for image viewing application, especially in slide
show. The screen is dominated by picture. Powerpoint presentation
could use this profile also.
ii. Enhancement Point:
1. Dynamic contrast enhancement by histogram analysis (DLC)
should be off.
2. Sharpness and color to be enhanced 75%.
3. Color temperature 6500°K
4. Brightness level sets to maximum.
5. Smart Response set to "Off". (N/A for this model)
6. Smart Contrast set to "Off".
i. Purpose: Adjust brightness level for reducing power consumptions
ii. No optimization by Smart Image.
iii. Design:
1. Brightness level set to 70%, a little higher brightness level
than laptop PC, fine tune brightness level before DVT exit.
2. Color temperature set to 6500K.
3. Gamma Table is turn on.
i. Purpose: No optimization by SmartImage.
ii. Design:
1. This will follow user OSD setting. If any change by user, it
will be saved. When switch back from other SmartImage
profiles, it will go back to last saved setting.
2. Gamma Table is turn on to reduce bad color tracking.
3.
59
220SW8 LCD