Philips 220SW8FB1/69 Service Manual page 58

58 220SW8 LCD
B. Because each preset profiles will define default setting of these 3 parameters.
Users can understand what is the value of that in preset profile by open the main
OSD.
C. When any SmartImage Lite profile had been enabled. The parameters in main OSD
are still available for user to adjust. But these adjustments are temporary only. If
users switch to another profile and then go back. The setting in main OSD will show
preset values of that SmartImage profile enabled.
3.14.2.6 Profile Definitions (system integrators to input at design stages)
A. Office Work
B. Entertainment
GENERAL PRODUCT SPECIFICATION(Continued)
i. Purpose: Design for general office application, like word
processing, Spreadsheet and email. The screen is dominated by
text.
ii. Enhancement point:
1. A little sharpness for increasing the details of e.g. an excel
grid.
No other type of enhancement as it won't bring value.
2. Color temperature remains in 6500°K.
3. Brightness level should be 70%.
4. Smart Response set to "Off".
5. Smart Contrast set to "Off".
i. Purpose: Design for video application, Like Microsoft Media Player
or Real Player. The screen is dominated by video.
ii. Enhancement Point:
1. Dynamic contrast enhancement by histogram analysis (DLC)
should be implemented.
2. Sharpness enhanced 90%.
3. Color enhancement set as the same with Video.
4. Color temperature set to 7500° (Based on final PQ settings)
(if higher)
5. Brightness level sets to maximum.
6. SmartResponse set to "High".(N/A for this model)