Outform iDisplay enterprise User Manual page 26

desired content to the USB drive from your computer, and then perform the auto-copy
procedure a second time.
I do not have an NFC card on me. How do I unlock the tablet from the counter
stand?
See "Unlocking the Counter Stand through the Software" on page 16 above.
I drew an M shape on the screen and entered the password, but still cannot
remove the tablet?
After 10 seconds the counter stand locking mechanism automatically relocks. Remove
the tablet immediately after drawing the M shape and entering the relevant password.
Why does nothing happen when I swipe an NFC card on the counter stand?
Make sure the card physically makes contact with and touches up against the top rear
rounded edge of the counter stand with an LED. Hold the card in this position until the
LED reacts by blinking.
Why does the counter stand not unlock when I swipe the manager NFC card?
The manager card is only used to pair user cards with counter stands, and does not
unlock counter stands.
I lost an NFC card. What do I do?
The box that the counter stand arrives in when delivered contains 1 manager NFC card
and 3 user NFC cards. If you lost one of the user cards, ask the responsible person in
your organization for one of the backup user cards. If none of the user cards can be
located, or the manager card has been lost, contact OUTFORM to order more cards:
http://outform.com/support/
How do I adjust the sound, screen brightness, Android system language
preferences, etc.?
All of these Android system-specific settin s can be adjusted in the Android Settings
interface, accessible via the Android operating system home screen.
How can I contact OUTFORM about any other issue not listed here?
Please contact us through our support webpage: http://outform.com/support/
25
All Rights Reserved
C