GMC Navigation System 2006 Yukon Manual page 25

Edit: Touch the Edit screen button to select a POI as
the next destination you would like to preview.
To preview a POI's destination instead of the final
destination, do the following:
1. Touch the Edit screen button.
2. Touch the Select POI screen button.
3. Touch the screen button of the desired POI
category.
4. Touch the icon screen button of the desired POI,
then touch the OK screen button.
5. Touch the Back screen button twice to get to the
Edit Route Preview screen.
6. Touch the Next POI screen button, then touch the
OK screen button.
7. Touch the Back screen button to return to the
Route Preview screen.
Now when you touch the arrow screen buttons to
preview the route, it will trace the route to the
next selected POI rather than the route to the final
destination.
To return to previewing the route to the final destination,
do the following:
1. Touch the Edit screen button.
2. Touch the Next screen button.
3. Touch the OK screen button, then the Back screen
button to return to the Route Preview screen.
Now when you touch the arrow screen buttons to
preview the route, it will trace the route to the
final destination rather than the route to the
next POI.
Use the following arrow screen buttons from the Route
Preview pop-up menu to trace a route:
Iq
(Preview to current location): Touch this screen
button to preview the route traveling toward the
vehicle's current location. Touch this screen button
repeatedly to increase the speed at which the indicator
will trace the route.
rh
(Preview to final destination): Touch this
screen button to view the route traveling toward the final
destination. Touch this screen button repeatedly to
increase the speed at which the indicator will trace
the route.
It
(View current location): Touch this screen
button to view the vehicle's current location along the
current route.
uh
(View final destination): Touch this screen
button to view the final destination along the current
route.
2-13