System Requirements; Product Setup; Setup Wizard - D-Link DNR-202L Quick Installation Manual

SySTEm REQUIREmENTS

• computer with microsoft Windows
• pc with pentium 4 – 2.4 GHz or above; at least 512 mB Ram
• Internet explorer 8 or above, Firefox 3.5 or above, safari 4 or above, chrome 2 or above
• existing 10/100 ethernet-based network

PRODUCT SETUP

SETUP WIZARD - Windows
Step 1:
connect the included ethernet cable to the network cable connector located on the side panel of the
dnR-202l and attach it to the network.
Step 2:
attach the external power supply to the dc power input connector located on the side panel of the
dnR-202l and connect it to your wall outlet or power strip. power is confirmed when the blue led
power Indicator located on the front panel is lit.
Step 3:
Insert the dnR-202l driver cd in the cd-Rom drive. If the cd autorun function does not automatically
start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where d: represents
the drive letter of your cd-Rom drive) and click OK. When the autorun screen appears, click Install
and follow the on-screen instructions.
Step 4:
click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to
finish setting up your nVR.
DNR-202L
®
8/7/Vista/Xp, or mac os 10.5 or above
3