Registering A Handset To The Base Unit; Support Information - Panasonic KX-TG1855AL Quick Manual

Registering a handset to the base unit

The supplied handset and base unit are pre-registered. When you purchase an
additional handset, refer to the additional handset's installation manual for
registration. If for some reason the handset is not registered to the base unit, register
the handset.
1
{j/OK}
2
{^}/{V}: "Handset Setup" i {>}
3
{^}/{V}: "Registration" i {>}
4
{^}/{V}: "Register H.set" i {>}
5
Press and hold {x} on the base unit for about
5 seconds, until the registration tone sounds.
6
Wait until "Enter Base PIN" is displayed.
i Enter the base unit PIN (default: "0000").
i {j/OK}
Optional service (Caller ID)
If you subscribe to Caller ID service, you can:
012345

Support information

Customer Support Centre Tel. No.: 132600 or website www.paansonic.com.au
– display caller information
– 7 –
{j/OK}
{x}
{j/OK}