Turn Signal Lever - Toyota 2015 4runner Service Manual

202
4-2. Driving procedures

Turn signal lever

Operating instructions
The lever will return to its original position after operation.
1
Right turn
2
Lane change to the right (push
and hold the lever partway)
The right hand signals will flash
until you release the lever.
3
Lane change to the left (push
and hold the lever partway)
The left hand signals will flash until
you release the lever.
4
Left turn
■
Turn signals can be operated when

Vehicles without a smart key system
The engine switch is in the "ON" position.

Vehicles with a smart key system
The engine switch is in IGNITION ON mode.
■
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
4RUNNER (U)_(OM35B18U)
I n f o r ma t i o n P r o v i d e d b y :