Shooting, Viewing, And Erasing - Olympus VG-160 User Manual

5
Use HI to select your home time zone and
press the Q button.
●
Use FG to turn daylight saving time ([Summer])
on or off.
The menus can be used to change the selected time
zone. [World Time]
6
Use FGHI to select your language and
press the Q button.
The menus can be used to change the selected
language. [W] (Language)
Shooting, Viewing, and
Erasing
Shooting with the optimum aperture
value and shutter speed
[Program Auto]
In this mode, automatic shooting settings are activated
while also allowing changes to a wide range of
other shooting menu functions, such as exposure
compensation, white balance, etc. as needed.
1
Press the n button to turn on the
camera.
B01_Basic_d4478-79-80_en.indd 5 B01_Basic_d4478-79-80_en.indd 5
'11.02.26.12:30
Seoul Seoul
Tokyo Tokyo
Summer Set OK
2
3
[Program Auto] indicator
4 4
14
M
Number of storable still pictures
Monitor
(standby mode screen)
If the [Program Auto] indicator is not displayed, press
H to display the function menu and then set the
shooting mode to P.
Current shooting mode display
Program Auto Program Auto
4 4
14
M
Press the n button again to turn off the camera.
Hold the camera and compose the shot.
When holding the camera, take care not to cover the
fl ash with your fi ngers, etc.
Press the shutter button halfway down to
focus on the subject.
●
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
●
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
P P
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
# #
P P
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
EN 5
2010/11/24 15:02:30 2010/11/24 15:02:30