Adjustment Of The Ae (Ae) - Minolta dynax 7 Repair Manual

56 (2181)

Adjustment of the AE (AE)

Required equipment
Luminance box
L-2101/L-2111 or multi camera tester: EF-8301
Master Lens
PC with preinstalled the 2181 adjustment program
CF card for Adjustment
USB-2 (USB cable)
AC Adapter AC-11
Preparation of the adjustment
1. Set camera to adjustment mode.
Refer to "Starting up the 2181 adjustment program (in the adjustment mode)" in P. 49.
2. Set the camera and the measuring instrument as shown on the Fig.1.
Procedure of the adjustment
1. Click "AE" of the adjustment menu.
2. According the displayed information in the window, set the brightness of the luminance box and then
click "OK".
3. Repeat step 2 5 times, with brightness EV 6, EV 15, EV 10, EV 6 again and EV 15 again.
4. The adjustment is completed when "OK" is displayed on the adjustment menu.
■ ■ ■ ■ ■ Fig. 1 Fig. 1 Fig. 1 Fig. 1 Fig. 1
C a m e r a : C a m e r a : C a m e r a : C a m e r a : C a m e r a :
Master Lens: focus infinte Master Lens: focus infinte Master Lens: focus infinte Master Lens: focus infinte Master Lens: focus infinte
Luminance box： ： ： ： ： Luminance box Luminance box Luminance box Luminance box
Brightness: listed above Brightness: listed above Brightness: listed above Brightness: listed above Brightness: listed above