How to check Lamp Used time
The LAMP REPLACE indicator will light yellow when the total lamp used time (Corresponding value) reaches 3,000 hours.
This is to indicate that lamp replacement is required.
The total lamp used time is calculated by using the below expression,
Total lamp used time (Corresponding value) =
t
eco : used time in the Eco mode
t
normal : used time in the Normal mode and Auto mode.
You can check the lamp used time following to the below procedure.
1
Press and hold the oN/StANd-BY button on the projector or remote control unit for more than 0 seconds.
2
The projector used time and lamp used time will be displayed on the screen briefly as follows.
t
t
eco + (
Projector used time
Counter
Projector
Lamp
Normal
Corresponding value
Total lamp used time
normal x 1.5)
450 H
200 H
Eco
250 H
550 H
- 13 -
Lamp Replacement