Log Into The Ripc; Main Screen - Belkin F1DE101G User Manual

P74238ea_F1DE101G-man.qxd 28-04-2003
USING YOUR RIPC
We recommend the following browser for a secured connection to the RIPC:
Microsoft Internet Explorer version 5.5 or higher on Windows 98, Me, 2000,
and XP
Netscape Navigator 7.0 or Mozilla 1.0 on Windows 98, Windows Me, 2000, XP,
Linux, and other UNIX-like operating systems
Internet Explorer Showing the Encryption Length

Log Into the RIPC

Start your web browser and direct it to the address of your RIPC configured
during installation.
To establish an unsecured connection, you must enter the following into the
address line of your browser:
http://192.168.1.22/
For a secure connection, you must enter:
https://192.168.1.22/
The RIPC has a built-in administrator-user that has permission to administrate
your system:
Login name administrator
Password Belkin
09:33 Page 16
16
USING YOUR RIPC
Note: Be sure to change the administrator-user password immediately after you
have installed and accessed your RIPC for the first time.

Main Screen

After a successful login, the RIPC will present its main screen frames (see
Figure below).
The home button brings you instantly to the home page from one of the
administration menu points. The logout button logs you out of the RIPC; it
terminates the current session and will require you to re-enter your user name
and password to log in again later.
Note: The RIPC will prompt you for a password automatically if there is no
administration activity for 30 minutes.
The RIPC's Home Menu Window
17