Master Section - Alto S-6 User Manual

4.9 MASTER section

- MAIN MIX LEVEL
This Control sets the amount of signal sent either
to the Main Out socket or to the Tape Output.
- PHONES/CONTROL ROOM
This Control sets the amount of signal sent to the
Control Room and headphone.
- LED METER
This stereo 6 segments Led Meter will indicate
the level of the overall output signal.
- 2 TRACK signal path
If you push down the 2TK TO CONTROL ROOM
button, the 2 TRACK IN signal will be routed into
the Control Room output and the level will be ad-
justed by the Control Room knob nearby the Main
MIX LEVEL knob.
If you push down the 2TR TO MIX button, the
2 TRACK IN signal will be routed into the MAIN
output and will be adjusted by the MAIN MIX
LEVEL knob.
- AUX RETURN
It will be used to return the signal of an effect
processor into the mixer but it can be also used
as an additional stereo line input. This signal of
the AUX RETURN is always assigned to the MAIN
MIX. The Aux Return input will operate in mono
if you connect an input only to the left socket.
- PHANTOM PWR
This switch will apply +48 Volt Phantom Power
only to the 2 XLR microphone inputs. Never con
-nect microphones when the Phantom Power is
on already.
- PHANTOM
This LED indicates when the Phantom Power is
switched on.
18
- PWR
This Led indicates when the Power is on in your
S-6.
11
12
13
14
15
16
17
16
PHANTOM PWR
15
-
AUX RETURN
2TK TO 2TK TO
14
CONTROL ROOM CONTROL ROOM
2TK TO MIX
-
CONTROL CONTROL
PHONES / PHONES /
12
8
PHANTOM PHANTOM PWR PWR
+15
CLIP
10
0
-4
-10
-30
L R
OUTPUT LEVEL
MAX - +15
MAIN MIX
ROOM ROOM
LEVEL
11
17
18
13