Changing The View Mode Settings; Adjusting The Wide Mode (Aspect Ratio) - Vizio D32-D1 User Manual

Changing the View Mode Settings

You can resize the video content to fit while the menu is open.
To change the on-screen menu language:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
3. Use the Arrow buttons on the
remote to highlight View Mode
and press OK. The VIEW MODE
menu is displayed.
4. Highlight your Viewport,
Overlay, or Centered Overlay
and press OK.
• Viewport - The entire picture
is visible in the space to the
right of the menu.
• Overlay - The left-hand
portion of the picture
covered by the menu.
• Centered Overlay - The picture extends off of the right side
of the screen.
5. Press the EXIT button on the remote. See Viewing Video with
the Menu Open on page 28 for an alternate way of resizing
the video content.
VIZIO
VIEW MODE
Viewport
Overlay
Centered Overlay
54

Adjusting the Wide Mode (Aspect Ratio)

The TV can display images in five different modes: Normal, Stretch,
Panoramic, Wide, and Zoom. Each mode displays the picture
differently.
To change the screen aspect ratio:
1. Press the WIDE button on the
Wide Zoom Normal Panoramic
remote.
2. Use the Arrow buttons to
highlight the aspect ratio you
wish to view and press OK.
Exit 2D 3D
• Normal preserves the content's
original aspect ratio. Since the 4:3
ABC
aspect ratio is not large enough
to fill the TV's screen, black bars
Input Wide CC
are added to the left and right of
the display image.
• Stretch expands the display image to fill the screen. Images
Sleep
may appear wider than intended. If you are watching
Picture Audio
Timer
widescreen (1.85:1 or 2.35:1) content, black bars will still
appear on the top and bottom of the display image. This
option is only available when the TV is displaying a
720p/1080i source.
Network Settings Help
• Panoramic expands the display image to fill the width of
the screen. Images may appear wider than intended. If
you are watching widescreen (1.85:1 or 2.35:1) content,
black bars will still appear on the top and bottom of the
display image. This option is only available when the TV is
displaying a 480i/480p source.
• Wide stretches a 4:3 aspect ratio picture to the edges of
the screen. Since the picture is being stretched, the display
image may appear distorted. If the program is already
formatted for widescreen viewing (1.85:1 or 2.35:1), then
black bars will appear on the top and bottom of the display
image.
• Zoom expands images with black bars to fit the screen.
4
Normal Normal
Panoramic Stretch
Wide Wide
Zoom Zoom
Note: Aspect ratio settings may
vary by Input source.