Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Vizio D39hn-D0
Summary of Contents for Vizio D39hn-D0
- Page 1 VIZIO USER MANUAL Model D32hn-D0 and D39hn-D0...
- Page 2 Misuse may result in electric shock or fire. To prevent To get the most out of your new VIZIO product, read these combination to avoid injury from tip-over. your TV from being damaged, the following instructions should be instructions before using your product and retain them for future observed for the installation, use, and maintenance of your TV.
- Page 3 • Do not apply pressure or throw objects at your TV. This may • Do not use your TV if any abnormality occurs. If any smoke • The mains plug or appliance coupler is used as the compromise the integrity of the display. The manufacturer’s or odor becomes apparent, unplug the power cord and disconnect device, the disconnect device shall remain warranty does not cover user abuse or improper...
- Page 4 TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Ground Clamp Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides Antenna Lead In Wire...
- Page 5 For DTS patents, see http://patents.dts.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Manufactured under license from DTS Licensing Limited. Laboratories. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc.
-
Page 6: Table Of Contents
Table Of Contents Table Of Contents Getting to Know Your TV ..........3 Setting the Sleep Timer ..............31 Removing the USB Drive from the TV ..........45 Setting the Auto Power Off Feature ..........31 Inspecting the Package Contents ............3 Troubleshooting & Technical Support ......47 Setting Up Channels ................32 Installing the TV ..................4 Specifications ...............51... -
Page 7: Getting To Know Your Tv
Before installing your new TV, take a moment to inspect the package contents. Use the images below to ensure nothing is missing or damaged. Remote Control Remote Control VIZIO LED HDTV Power Cord with Batteries with Batteries (for D32hn-D0) (for D39hn-D0) -
Page 8: Installing The Tv
INSTALLING THE TV To install the stand: After removing the TV from the box and inspecting the package contents you can begin installing the TV. Your TV can be installed in two ways: • On a flat surface, using the included stand •... -
Page 9: Installing The Tv On A Wall
TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. D32hn-D0 D39hn-D0 Screw Size: Hole Pattern: 100mm (V) x 100mm (H) 100mm (V) x 100mm (H) Weight w/o 9.48 lbs... -
Page 10: Front Panel
REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off on page 46. FRONT PANEL... -
Page 11: Rear Panel
USB - Connect a USB thumb drive to play music and view photos. HDMI - Connect an HDMI device. Optical Audio Out - Connect an optical/SPDIF audio device, such as home audio receiver. Stereo Audio Out- Connect an RCA audio device, such as sound bar. HDMI - Connect an HDMI device. -
Page 12: Remote Control Front
Replacing the Batteries USING THE REMOTE POWER INPUT Change the currently-displayed input. Turn TV on or off. MENU EXIT Close the on-screen menu. Display the on-screen menu ARROW Select the highlighted menu option. Navigate the on-screen menu. BACK GUIDE Go to the previous on-screen menu. Display the info window. -
Page 13: Remote Control
Replacing the Batteries USING THE REMOTE INPUT POWER Change the currently-displayed input. Turn the TV on or off. A/V CONTROLS INFO Control USB photo player. Display the info window. CLOSED CAPTIONS MENU Open the closed caption menu. Display the on-screen menu. EXIT ARROW Close the on-screen menu. -
Page 14: Connecting Your Devices
Connecting Your Devices CONNECTING A DEVICE Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.). 2. Turn the TV and your device off. 3. -
Page 15: Connecting A Device - Audio & Video Cable Types
CONNECTING A DEVICE - AUDIO & VIDEO CABLE TYPES AV CABLE COAXIAL CABLE COMPONENT CABLE HDMI CABLE AV cables (or Composite cables) are the Coaxial cables are the traditional way of Component cables are designed to carry high HDMI is the intelligent, all-digital interface that definition video signals along with additional delivers both dazzling quality and unmatched ease traditional way of connecting your devices to... -
Page 16: Connecting An Audio Device
TV (Optical, RCA, or HDMI). 2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the Home Audio Receiver VIZIO Sound Bar device. 4. Turn the TV and your device on. RCA CABLE* GOOD •... -
Page 17: Connecting An Audio Device - Audio Cable Types
CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES RCA CABLE OPTICAL/SPDIF CABLE HDMI CABLE cables Composite cables) Optical/SPDIF cables transmit audio signals as HDMI technology transmits crystal-clear digital traditional way of connecting your devices to your pulses of light through a cable made of plastic multi-channel surround audio through a single audio device. -
Page 18: Connecting An Audio Device - Arc
CONNECTING AN AUDIO DEVICE - ARC Without HDMI ARC With HDMI ARC With an HDMI ARC setup, the audio connection between your Without an HDMI ARC setup, your TV will transmit audio signal TV and Home Audio Receiver can be removed. The HDMI cable from the built-in tuner and VIA apps to your home audio receiver will transmit audio signal to and from your TV with an all-digital through a separate audio connection. -
Page 19: Completing The First-Time Setup
Completing The First-Time Setup The first time you turn on the TV, the Setup App will guide you through each of the steps necessary to get your TV Choose your mode. Select Store Demo for in-store display. ready for use. Select Home Use for in-home use. - Page 20 If the TV Signal channel scan screen appears, the TV will need to scan for channels, which takes several minutes. Use the arrow buttons on the remote to highlight Begin Scan and press OK. Note: Number of ports may differ by TV. Otherwise, use the Arrow and OK buttons on the remote to select the input your TV source is connected to.
-
Page 21: Using The On-Screen Menu
TV. To use one of these devices with your TV, you must first change the input source using From this menu, you can: Use the Arrow buttons to highlight VIZIO the Input menu. • Adjust the Picture settings... -
Page 22: Changing The Screen Aspect Ratio
CHANGING THE SCREEN ASPECT RATIO not stretched, but the sides of the image are extremely stretched. If you are watching widescreen (1.85:1 or 2.35:1) content with black bars on the top and bottom, the black The TV can display images in five different modes: Normal, Stretch, bars will still appear on the top and bottom of the display Panoramic, Wide, and Zoom. -
Page 23: Adjusting The Picture Settings
ADJUSTING THE PICTURE SETTINGS 3. Use the Arrow buttons on the 4. To manually change each of the picture settings, use the Up/ VIZIO remote to highlight Picture Down Arrow buttons on the remote to highlight that picture Mode, then use the Left/Right... -
Page 24: Adjusting More Picture Settings
1. From the PICTURE menu, use the To adjust the color temperature: Arrow buttons to highlight More adjust the vertical size of the displayed picture. Press the VIZIO VIZIO Picture, and then press OK. OK button when you are finished. -
Page 25: Adjusting The Picture Mode Edit Settings
To adjust the Picture Mode Edit settings: 1. From the PICTURE MODE EDIT • The custom picture mode is not automatically saved. VIZIO 1. From the PICTURE menu, use the menu, use the Arrow buttons VIZIO Arrow buttons to highlight Picture... -
Page 26: Deleting A Custom Picture Mode
Deleting a Custom Picture Mode Custom picture modes that are no longer needed can be deleted. Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode. To delete a custom picture mode: 1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight To delete the user created Custom 1 picture mode, Delete Picture Mode, and then... -
Page 27: Adjusting The Color Tuner Settings
Adjusting the Color Tuner Settings To turn color channels off and on: To adjust the 11 Point White Balance settings: The Color Tuner settings allow you to adjust the HSB color and 11 1. From the COLOR CALIBRATION menu, use the Arrow buttons 1. - Page 28 To show or hide the SMPTE Test Pattern: To show or hide the Flat Test Pattern: To show or hide the Ramp Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to 1. From the Color Tuner menu, use the Arrow buttons to 1.
-
Page 29: Adjusting The Audio Settings
HDMI ARC output when connected to a 1. Press the MENU button on the To select a pre-set audio mode: home theater audio system. Select PCM or Bitstream. VIZIO remote. The on-screen menu 1. Press the MENU button on the remote. The on-screen menu is AUDIO is displayed. -
Page 30: Deleting The Custom Audio Mode
Deleting the Custom Audio Mode To delete the custom audio mode that has been created: 1. Press the MENU button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. -
Page 31: Setting Timers
To set the Auto Power Off feature: 1. Press the MENU button on the 1. From the TIMERS menu, use the Up/Down Arrow buttons on VIZIO remote. The on-screen menu is the remote to highlight Auto Power Off. displayed. -
Page 32: Setting Up Channels
Channel Search and Add Analog Channel options. This is quicker • Select a Channel Source 1. From the CHANNELS menu, highlight Channel Source and than scanning all possible channels. VIZIO • Find Channels press OK. The CHANNEL SOURCE menu displays. CHANNELS To add a range of new channels: •... -
Page 33: Skipping Channels
Skipping Channels After a channel scan is completed, you may find that some channels 1. From the CHANNELS menu, VIZIO are too weak to watch comfortably. There may also be some highlight Add Analog Channel channels you do not want to view. You can remove these channels ADD ANALOG CHANNEL and press OK. -
Page 34: Listening To Alternate Audio
LISTENING TO ALTERNATE AUDIO To use the Digital Language feature: 1. From the CHANNELS menu, Changing the Analog Audio Language highlight Digital Language VIZIO and press OK. The DIGITAL Some analog over-the-air (free) and cable channels broadcast DIGITAL LANGUAGE LANGUAGE menu is displayed. -
Page 35: Setting Up Closed Captioning
TV will not display them. 1. From the CLOSED CAPTIONS • Window Opacity - Change the opacity of the closed VIZIO menu, use the Arrow buttons to captioning box. highlight Digital Style and press DIGITAL STYLE 4. - Page 36 Typical choices include: Background • Opaque background, transparent window—Only a strip of Text background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode. • Opaque background and window in the same color—When text appears, the entire line fills with color at once. In the example below, the closed caption text is green, the background is black, and the window is red.
-
Page 37: Renaming Devices On The Input Menu
To change the name of an input: 1. Press the MENU button on the remote. The on-screen menu is displayed. VIZIO 2. Use the Arrow buttons on the remote to highlight Devices and NAME INPUT press OK. The DEVICES menu is displayed. -
Page 38: Changing The Tv Settings
Your TV can display the on-screen menu in different languages. Using the System menu, you can: network connection: To change the on-screen menu language: VIZIO • View system information 1. Press the MENU button on the remote. The on-screen menu is SYSTEM 1. -
Page 39: Setting The Time And Local Settings
1. Press the MENU button on the The Parental Controls menu only appears when: To enable or disable the Program Rating feature: VIZIO remote. The on-screen menu is • You are using the tuner to receive your TV signals, such as June 11, 2015 11:48AM 1. -
Page 40: Blocking And Unblocking Content By Rating
Blocking and Unblocking Content by Rating Changing the Parental Control PIN Resetting the Content Locks A channel may sometimes broadcast programs that are meant for If you use the parental controls, you should change the PIN to To reset the content locks to the factory-default settings: children, and at other times broadcast programs that are meant prevent children from accessing inappropriate material. -
Page 41: Changing The View Mode Settings
1. Press the MENU button on the • Standard Definition (480i and 480p) - Fills the screen VIZIO remote. The on-screen menu is Some programs have black bars on the top or sides of the picture from the left to right edges. -
Page 42: Adjusting The Cec Settings
The Power Indicator on the front of your TV normally does not glow connected to HDMI (ARC) input with the included remote, without when the TV is on. You can change this setting if you prefer the light any programming. Using CEC, your VIZIO TV remote can control: to be on. •... -
Page 43: Using The Reset & Admin Menu
This includes any V.I.A. Plus Apps that you have added and any changes you have made to the settings for those Apps. To restore the TV to its factory default settings: 1. Press the MENU button on the VIZIO remote. The on-screen menu is displayed. RESET & ADMIN Wide... -
Page 44: Using The Guided Setup Menu
Press the INFO or GUIDE button two times to display the 1. Press the MENU button on the program title, program rating, audio information, and the VIZIO remote. The on-screen menu is start and end times of the program. displayed. -
Page 45: Using The Usb Media Player
Using the USB Media Player Using the USB Media Player Preparing Your USB Drive to Play USB Media Removing the USB Drive from the TV To display USB media, you must first save your photos onto a USB The USB Media Player allows you to connect a USB thumb drive to To safely remove your USB drive from the TV: thumb drive: your TV to view photos... - Page 46 OK to return to browse files and folders the previous screen. Current Folder using the Arrow and OK Displays the folder path. buttons on the remote. Connected Sources VIZIO Displays VIZIO_2GB\Photo\root Photo connected USB USB1: devices. Current Folder root A.jpg...
-
Page 47: Troubleshooting & Technical Support
Troubleshooting & Technical Support Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with: • New Product Setup • Connecting Your Devices • Technical Problems • Product Updates • And More Live Chat Support Available You can also contact our... - Page 48 Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications. REGISTER YOUR VIZIO PRODUCT NOW...
- Page 49 However, sometimes pixels may • Ensure all devices are connected correctly. Devices differ; Settings on page 2522 . VIZIO recommends selecting not display correctly. These types of occurrences are see your device’s user manual for details.
- Page 50 I see “noise” or static on the screen. • When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image. • If you are using an antenna, the signal strength of the channel may be low.
-
Page 51: Specifications
Specifications D32hn-D0 D32hn-D0 Screen Size: 32" Remote Control Model: XRT020 Viewable Area: 31.51" UL, cUL, FCC Class B, BET7/ICES-003 Class B, Certifications: IC, HDMI (CEC, ARC), Dolby Digital Dimensions w/ Stand: 28.70” x 19.10” x 7.87” w/o Stand: 28.70” x 17.13” x 2.91” Voltage Range: 120 V @ 60 Hz Weight w/ Stand:... -
Page 52: Specifications
Specifications D39hn-D0 D39hn-D0 Screen Size: 39" Remote Control Model: XRT010 Viewable Area: 38.5" UL, cUL, FCC Class B, BET7/ICES-003 Class B, Certifications: IC, HDMI (CEC, ARC), Dolby Digital Dimensions w/ Stand: 34.75” x 22.68” x 8.27” w/o Stand: 34.75” x 20.51” x 2.91”... -
Page 53: Regulatory Information
Regulatory Information FCC Class B Radio Interference Statement Notice Canada Notice for License-Exempt Radio Apparatus NOTE: This equipment has been tested and found to comply with The changes or modifications not expressly approved by the party This device complies with Industry Canada’s license-exempt RSSs. the limits for a Class B digital device, pursuant to Part 15 of the FCC responsible for compliance could void the user’s authority to Operation is subject to the following two conditions: (1) This device... -
Page 54: Limited Warranty
(l) products sold “AS IS”, “CLEARANCE”, waiver for United States residents. If you live in the United States, the When you return a product to a VIZIO service center, you must ship the “FACTORY RECERTIFIED”, or by a non-authorized reseller. - Page 55 General the product, and (d) a clear statement that you wish to opt out of the No employee or agent of VIZIO may modify this warranty. If any term of this binding arbitration agreement and class action waiver. warranty, other than the class action waiver, is found to be unenforceable,...
-
Page 56: Mexico Limited Warranty
RETAILER WHERE YOU PURCHASED IT. All other VIZIO products must be sent to a VIZIO service center to Your Obligations Before Service obtain warranty service. VIZIO is not responsible for transportation... - Page 57 General VIZIO is not obligated to honor the warranty in the following cases. No employee or agent of VIZIO may modify this warranty. If any (a) When the product has been used under other than normal term of this warranty is found to be unenforceable, that term will conditions.
-
Page 58: Legal Information
Your use of this product is subject to VIZIO’s to use the computer as voltage, frequency and plug configurations... - Page 59 © 2015 VIZIO INC. ALL RIGHTS RESERVED. 110315AD-US-NC...