Changing The View Mode Settings; Adjusting The Wide Mode (Aspect Ratio); Changing Your Tv Name - Vizio M70-C3 User Manual

Changing the View Mode Settings

You can resize the video content to fit while the menu is open.
To change the view mode settings:
1. Press the MENU button on the
VIZIO
remote. The on-screen menu is
displayed.
VIEW MODE
2. Use the Arrow buttons on the
remote to highlight System and
press OK. The SYSTEM menu is
displayed.
3. Use the Arrow buttons on the
remote to highlight View Mode
and press OK. The VIEW MODE
menu is displayed.
4. Highlight Viewport, Overlay,
or Centered Overlay and press
OK.
• Viewport - The entire picture
is visible in the space to the
right of the menu.
• Overlay - The left-hand
portion of the picture
covered by the menu.
• Centered Overlay - The picture extends off of the right
side of the screen.
5. Press the EXIT button on the remote. See Viewing Video with
the Menu Open on page 24 for an alternate way of resizing
the video content.

Adjusting the Wide Mode (Aspect Ratio)

The TV can display images in five different modes: Normal,
Stretch, Panoramic, Wide, and Zoom. Each mode displays the
picture differently. See Changing the Screen Aspect Ratio on page
24 for an alternate way of adjusting the Wide Mode.
To change the screen aspect ratio from the SYSTEM menu:
1. Press the MENU button on the remote. The on-screen menu is
Wide Zoom Normal
Viewport
displayed.
Overlay
Centered Overlay
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
Exit 2D 3D
3. Highlight Wide and press OK.
Use the Arrow buttons to
ABC
highlight the aspect ratio you
wish to view and press OK.
Input Wide CC
• Normal preserves the content's
original aspect ratio. Since the 4:3
aspect ratio is not large enough to
fill the TV's screen, black bars are
Sleep
Picture Audio
Timer added to the left and right of the
display image.
• Stretch expands the display image to fill the screen. Images
may appear wider than intended. If you are watching
Network Settings Help
widescreen (1.85:1 or 2.35:1) content, black bars will still
appear on the top and bottom of the display image. This
option is only available when the TV is displaying a
720p/1080i/1080p source.
• Panoramic expands the display image to fill the screen.
Images may appear wider than intended. If you are watching
widescreen (1.85:1 or 2.35:1) content, black bars will still
appear on the top and bottom of the display image. This
option is only available when the TV is displaying a
480i/480p source.
• Wide stretches a 4:3 aspect ratio picture to the edges of the
screen. Since the picture is being stretched, the display image
may appear distorted. If the program is already formatted
for widescreen viewing (1.85:1 or 2.35:1), then black bars will
appear on the top and bottom of the display image.
• Zoom expands images with black bars to fit the screen.
Panoramic
Normal Normal
Panoramic Stretch
Wide Wide
Zoom Zoom
Note: Aspect ratio settings may
vary by Input source.

Changing your TV Name

Enter a custom DNLA name for your TV (Up to 10 characters long)
To create a custom name for your TV:
1. Press the MENU button on the
VIZIO
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
VIZIOTV_
remote to highlight System and
a b c d e f
press OK. The SYSTEM menu is
j k l
displayed.
s t
3. Use the Arrow buttons on the
1 2 3 4 5 6 7 8 9
remote to highlight TV Name
.@#
and press OK. The TV NAME
menu is displayed.
OK
Cancel
4. Use either the on-screen
keyboard or keyboard on your
remote control to enter a name
for your TV (Name can be up to
10 characters long).
When you are finished, highlight
OK and press the OK button.
5. Press the EXIT button on the remote.
4
TV NAME
Wide Zoo
g h i
m n o p q r
Exit 2D
u v w x y z 0
.com Space
äêí
Input W
Sleep
Pic
Timer
Network Set
45